PAS - Plastic Assembly Systems

 
Contact PAS:
Name:
Phone:
Email:
 

All Categories > Ultrasonic Welders > Model 215 Press/Thruster, 20/15 kHz > Item # Model 215  
    Download PDF Download PDF     Save To Favorites Save To Favorites

Item # Model 215 Model 215 Press/Thruster, 20/15 kHz


Press/thruster design provides system flexibility and upgradeability, reducing equipment investment

Compatible with all current PAS custom assembly system components, including sound enclosures and rotary tables

Model 215

larger image

Model 215_dim

larger image



Thruster Dimensions · Press Dimensions · Options · Standard Features · Specifications and Options

Thruster Dimensions

Housing Height

35.00 in
889 mm

Housing Width

5.87 in
149 mm

Housing Depth

 Question? 		10.00 in
254 mm

Weight

93.00 lbs
49 kg

Press Dimensions

Base Width

18.56 in
471 mm

Base Depth

24.83 in
631 mm

Column Height

40.00 in
1016 mm

Column Diameter

7.50 in
191 mm

Maximum Height

62.00 in
1574 mm

Housing Width 

5.87 in
149 mm

Column C.L. to Horn C.L.

12.38 in
314 mm

Useable Throat

8.50 in
216 mm

Stroke

7.00 in
178 mm

Weight 

400.00 lbs
182.0 kg

Options

Options

Electronic pressure regulator
Force transducer (load cell)
Linear optical encoder
Pressure transducer
Sound enclosure

Standard Features
  • Rugged, heavy duty construction using the highest quality components provides superior performance, precision, and reliability
  • Ultra-rigid square support column with rack and pinion height adjustment and up to 10° of radial alignment capability
  • Gas strut counterbalance makes height adjustment easy and can be specified on either side of welder (at time of order)
  • Handwheel can be specified on either side of welder (at time of order)
  • Heavy duty precision slide assembly with 1" (25.4mm) diameter steel rods and sealed Thomson ball bushings pre-loaded for clearance-free, frictionless operation
  • Dual pressure increases clamp force to improve melt during the weld cycle, or to provide tighter assembly during the hold cycle
  • 7" (178mm) stroke with mechanical bottom stop adjustable in .001" (.025mm) increments
  • All controls are accessible from the front for convenient set-up and operation
  • Top-of-stroke limit switch for automation applications
  • Easy to use front panel position indicators with universal icons instantly show settings of bottom stop, pre-trigger, and end-of-weld switches
  • Pre-trigger and end-of-weld (lower) limit switches are standard and adjustable in .001" (.025mm) increments
  • OSHA-required lockout for air supply is standard
  • Ergonomic base and cycle activation switches reduce operator fatigue; optional opti-touch cycle activation switches available
  • Status indicators in base for Power, In Cycle, and Abort clearly communicate system conditions
  • Twist-release emergency stop switch meets international safety standards
  • Transducer and aluminum booster are standard (20kHz resonent mount transducers standard)
  • Press/thruster design provides system flexibility and upgradeability, reducing equipment investment
  • Compatible with all current PAS custom assembly system components, including sound enclosures and rotary tables


    		•

    Specifications and Options
    Pneumatic requirements: 80-110 psi max. clean, dry air

    Maximum available clamp pressure: 777 lbs at 110 psi with standard 3.00" (76mm) air cylinder

    Allow 5.00" (130mm) behind the press/thruster for air line and cable connections

     DOWNLOADS 

    width= Model 215 Press/Thruste
    (PDF, 205KB)

     COMPATABLE WITH 


    Dynamic Process Controller DPC II Plus

    Dynamic Process Controller™ DPC II Plus


    Copyright © 2013 Plastic Assembly Systems. All rights reserved. Specifications subject to change without notification. Privacy Policy.