Narrow 4.5" (114mm) profile for close center-to-center
distances in multihead and automation installations
Rugged construction using the highest quality components
provides superior performance, precision, and
reliability
Single-rail linear ball slide assembly system offers
accurate positioning, stable movement, and
friction-free resistance
Dual pressure increases clamp force to improve melt
during the weld cycle, or to provide tighter assembly
during the hold cycle
Optional hydraulic slow speed option available for
precise, repeatable control of horn travel during the
weld cycle
7" (178mm) stroke with mechanical bottom stop adjustable
in .001" (.025mm) increments
Top-of-stroke limit switch for automation applications
All controls are accessible from the front for convenient
set-up and operation
Easy to use front panel position indicators with universal
icons instantly show settings of position, bottom stop, and
optional slow speed
Chrome-plated column and titanium booster are standard
Internally mounted optional linear encoder saves
space in multihead and automated installations
Remote pneumatics availability offers increased
flexibility in system integration
OSHA-required lockout for air supply is standard
Ergonomic base and cycle activation switches reduce
operator fatigue
Status indicators in base for Power, In Cycle, and Abort
clearly communicate system conditions
Twist release emergency stop switch meets international
safety standards
Press/thruster design provides system flexibility and
upgradeability , reducing equipment investment
Compatible with all current PAS assembly system
components
Press/thruster can be used with 30kHz and 40 kHz
Dynamic Process Controllers™ in 350, 700, and 1500
watt power levels
Specifications and Options
HYDRAULIC SPEED CONTROL precision hydraulic
control of the melt velocity. Critical to achieve maximum
weld strength in staking, inserting and shear joint
applications.
LINEAR OPTICAL ENCODER Ability to weld by
collapse and absolute distance through out 7 inches of
stroke with .0005 of an inch resolution. (requires
DPC III or IV Plus w/ distance module)
PRE-TRIGGER and END-of-WELD LIMIT SWITCHES
Pre-trigger provides ability to initiate weld (sonics on)
phase of the cycle prior to contacting part. Great for
staking applications. End of weld provides ability to
weld to predetermined position in the stroke, simple
absolute distance.
4' (1219mm) chrome column increases part load area
height by 12 inches
1.50 ” (38mm), or 2.00 ” (51mm) and 3.00" (76mm)
air cylinder
PROGRAMMABLE pressure profiling and force by
interface with electronic pressure regulator, pressure
transducer, and load cell press options offer increased
control, repeatability, and consistency
OPTICAL cycle activation switches
Pneumatic requirements: 80-110 psi max.
clean, dry air
Maximum available clamp pressure: 540
lbs at 110 psi with standard 2.50"
(63.5mm) air cylinder
Allow 5.00" (130mm) behind the press/
thruster for air line and cable connections
All specifications are subject to change without notice.
Please consult PAS for any updated information.
