Electric Service Required: 480V, 3 Phase, 30 Amps (custom input voltage kits available) Pneumatic Service Required: 75 to 90PSI (5-6 Bar)
•Electromechanical vibration head assembly (200-240Hz) •Super rigid four rail table slide system •Massive flame cut bridge •Solid state 15hp digital vibration drive •Hydraulic lift/clamp force max. 4500 lbs. (20,000 N), 20 gallon reservoir, (75.6 L) •Allen-Bradley® SLC 5/03 controller with two available expansion slots •Allen-Bradley Panel View 600 full color touch screen display •Intuitive and interactive comprehensive help menu •Part parameter monitoring with programmable limits •Choice of either English or Spanish menu structure •Automatic tuning •Programmable amplitude 0.040" to 0.070" (1.0 to 1.8 mm) •Weld by time and weld by distance (absolute or meltdown) •Interior work light •Optical zero force cycle activation switches •Light Curtain for single switch activation •Less than 80 db in operation (continuous measurement) •Dual external utility outlets
•Table size 38" x 18" (965 x 455mm) (also max. tool size*) •Table opening 24" by 10" (610 x 250mm) with max., depth 20" (500mm) except F/B center strip 3" (75mm) wide with depth of 1/2" (12mm)** •Upper tool weight 35-90 pounds (15-40kg) •Low 41" (1040mm) lift table height •20" (500mm) Stroke, 25" (630mm) Max daylight
Options
•Position ajustable cycle activiation switches •Exterior work light •Customer-specified PLC and interface •Custom paint per customer specification •Rear sliding door for pass-through operation •Programmable pneumatic clamp or eject valves and/or programmable part-in-place sensing • We can also quote machines with custom frame sizes, lift tables, stroke lengths, etc., using standard vibration heads * Tool can in some instances overhang the back of the table by a modest amount. Consult PAS for more information.
** Custom lift table or custom frame can be quoted to allow for an uninterrupted "bucket" for greater depth.
